STK1160 based devices are supported (video and audio) under Linux by the easycap kernel module (kernel 2.6.38 and later) and further on by the stk1160 kernel module (kernel 3.7). More information on this wiki: Stk1160
Easycap Usbtv007 Driver Xp
If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter SMC Easycap SM-USB 007 into the search box above and then submit. In the results, choose the best match for your PC and operating system.
Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
You can download the setup, user's manual and/or drivers for additional operating systems at _v1_5.zip (MIU-Bxx2U-xx). This is only required the first time you use the USB007 drive. A small program called "U-Storage" will reside in your program files after setup is complete, to further manage your USB007 drive. We have found most people have little trouble in getting started. However, if you are having difficulty, we offer excellent technical support to get you going.
As well as using it with your Portsdown transmitter, the Fushicai USBTV007 can be used with Windows 10 to capture video in to your PC, however you may need to load the driver from the supplied CD. The latest Version (201709) of Windows 10 appears to automatically load a suitable driver provided by "Active Development Co Ltd" (08/06/2011, Version 2.1.1.2). The current driver version on the CD is provided by "OEM" and is Version 2.1.1.2 dated 08/06/2011 and it can be found in the Drivers\ATV007_Win7_32 or Drivers\ATV007_Win7_64 folder on the supplied CD. The USBTV007 will then identify itself as an "OEM Device" when you select a capture source.
The Fushicai USBTV007 also works well with vMix on Windows 10. Load the drivers as above, and select the "OEM Device" as a camera input. You may need to select the settings button (cogwheel) next to the input window and then select "Crossbar Properties" to bring up a dialog box to select the correct input as above. 2ff7e9595c
Commentaires